Chinese
EN
DH-5 hard and soft support balancing machine
Product Classification:
Product Description
Introduction:
Suitable for microelectronic rotors, power tool rotors, single-phase three-phase motor rotors, air-conditioning through-flow fans, centrifuge drums, turbocharger blades, etc.
Main configuration:
Value: 0-600 (resolution 1g.mm/kg)
Phase: 3-36 equal division (resolution 0.1 slot)
Minimum achievable residual unbalance:≦0.3g.mm/kg
Reduction rate of unbalance: URR≧90%
Advantages: There is no need for trial rotation and calibration and plane separation. The a-b-c-r1-r2 dial can be adjusted according to the actual size of the rotor, with intuitive display, high precision, and six support methods. Automatic memory, all phases of the speed value are displayed digitally.
Technical parameters:
| Scope of work quality: | 0.1-5Kg |
| Maximum working diameter: | 260mm |
| Workpiece supporting shaft strength range: | 3-40mm |
| The distance between the two supports: | 30-500mm |
| Motor: | 120W 2800r/min |
| Transmission mode: | O-shaped belt |
Keywords: outer winding stator winding machine, outer rotor winding machine, spot welding machine, precision turning machine
Related Products
Online Message
If you have any suggestions, please leave a message or send an email to us, and we will reply to you within 1 working day after receiving the message email.