Chinese
EN
TD-3 type automatic rotor winding machine
Product Classification:
Product Description
Introduction:
TD-3 full-automatic rotor winding machine is a double-flying fork winding machine dedicated to the production of hook-type commutator rotors, suitable for high-speed winding of medium and thick wire diameter rotors. This machine is designed with automatic cutting and clamping mechanism and auxiliary hooking method, and the automatic feeding mechanism realizes on-line automatic production. This machine is widely used in DC and series excitation motor rotor winding.
Main configuration:
Mitsubishi Program Controller from Japan
Taiwan Delta three sets of servo control systems
Embedded touch screen man-machine interface
Taiwan Airteck pneumatic system and air source treatment
Automatic feeding device (can be connected)
Main electrical components in Korea and Japan
Hysteresis tension control unit
Taiwan HIWIN linear guide
Technical parameters:
| Suitable winding diameter: | Ф0.15-Ф1.2mm |
| Rotor diameter: | Ф20-Ф80mm |
| Rotor stack thickness: | 10-90mm |
| Commutator diameter: | Ф8-Ф60mm |
| Action process: | Single action/automatic |
| Number of rotor slots: | odd and even slots |
| Number of turns: | 0-99999 |
| Flying fork speed: | 0-2000rpm |
| Parameter storage: | 0-99 |
| Power supply | AC380V 50/60Hz |
| Air source pressure: | 5-7kg/cm² |
| Overall power: | 4KW |
| Total weight: | About 1000kg |
| Volume: | 2000×1650×1950mm³ |
Keywords: outer winding stator winding machine, outer rotor winding machine, spot welding machine, precision turning machine
Related Products
Online Message
If you have any suggestions, please leave a message or send an email to us, and we will reply to you within 1 working day after receiving the message email.